Mercedes M-Class W163

since 1997 of release

Repair and car operation



Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
+ Current leaving and service
- Engine
   Check of kompressionny pressure in cylinders
   Engine check by means of the vacuum gage
   Replacement of a belt of a drive of auxiliary units and elements of the mechanism of its tension
   - Petrol models
      Removal and engine installation
      Removal and installation of covers of a drive of GRM
      Replacement of a gas-distributing chain
      Removal and installation of components of a drive of GRM
      Installation of base provision of camshafts
      Verification of the base provision of a balancing shaft (only series 112 engines)
      Removal and installation of GRM components
      Removal and head installation (ok) cylinders
      Removal and installation of the inlet pipeline
      Removal and installation of a final collector
      Removal and installation of a face cover, replacement of a back epiploon of a cranked shaft
      Removal and installation of a damper krutilny fluctuations/pulley of a driving belt
      Removal and flywheel installation / driving disk
      Removal and installation of support of a suspension bracket of the power unit
      Service of system of greasing
   + Diesel models
+ Systems of cooling, heating and air conditioner
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Removal and installation of a face cover, replacement of a back epiploon of a cranked shaft

М111

Face cover

Details of installation of a face cover of the engine of a series 111


 PERFORMANCE ORDER

  1. Details of installation of a face cover of the engine of a series 111 are shown on an illustration which all references meeting in the text concern.
  2. Remove transmission (see. Head Manual box of gear shifting or Avtomaticheckaya transmission).
  3. On models from RKPP remove coupling assembly (see. Head Transmission line).
  4. Remove a flywheel / a driving disk (see. Section Removal and flywheel installation / driving disk).
  5. Examine the engine on existence of signs of leaks, in case of need make replacement of a back epiploon of a cranked shaft (see below).
  6. Turn out fixing bolts (4 and 5).
  7. Having hooked for the ledges specified by shooters, separate a face cover (1) from the engine.
  8. Study a condition of an epiploon (21), in case of need make its replacement (see below).
  9. Installation is made upside-down.

Epiploon replacement

Details of installation of a back epiploon of a cranked shaft of the engine of a series 111

1а — the Special insert
1b — the Special insert

2 — the Special insert
21 — the Epiploon


 PERFORMANCE ORDER

  1. Details of installation of a back epiploon of a cranked shaft of the engine of a series 111 are shown on an illustration which all references meeting in the text concern.
  2. Remove a face cover of the engine (see above).
  3. Having hooked a screw-driver, take a back epiploon (21).
  4. Press a new epiploon in the NEW face cover from the back party of the last.
  5. Operating as it should be, the return to a dismantle order, establish into place removed components.

M112/113

Face cover

Details of installation of a face cover of engines of series 112 and 113

1 — the Face cover
2 — Directing pins

3 — the Epiploon of a cranked shaft


 PERFORMANCE ORDER

  1. Details of installation of a face cover of engines of series 112 and 113 are shown on an illustration which all references meeting in the text concern.
  2. Remove transmission (see. Head Avtomaticheckaya transmission).
  3. Remove a driving disk (see. Section Removal and flywheel installation / driving disk).
  4. Turn out fixing bolts and remove a face cover (1), having accurately hooked it in the places specified by shooters.
  5. Study a condition of an epiploon (3), in case of need replace a cover assembled with an epiploon.
  6. Installation is made upside-down.

Epiploon replacement

Details of installation of a back epiploon of a cranked shaft of engines of series 112 and 113

1 — the Face cover
2 — the Epiploon
3 — the Driving disk

4 — the Washer
5 — Bolts of fastening of a flywheel


 PERFORMANCE ORDER

  1. Details of installation of a back epiploon of a cranked shaft of engines of series 112 and 113 are shown on an illustration.
  2. The epiploon from a face cover is not subject to extraction and is replaced assembled with the last (see above).