General information |
Body |
Self-bearing, with a rigid zhiznesokhranyayushchy framework, forward and back zones of the directed energopoglashchayushchy deformation; the intra door and onboard amplifiers protecting at lateral collisions are applied. Two options of execution of a body are issued: with the standard and extended wheel base |
Bottom and niches of wheels |
Are covered with resistant protective mastic. |
Designation in the text |
The managements of racks of a body (in front back) And, In and With |
Lateral safety cushions |
Over lateral glasses and in all doors |
Overall dimensions of the car, mm |
See. Specifications to Head Governing bodies and receptions of safe operation
|
Adjustment of a cowl and doors
|
Landing gaps in body apertures, mm |
- Except the top gap of a door of a back
|
5.0 ± 0.5 |
- Top gap of a door of a back
|
9.5 ± 0.5 |
Assembly sizes of the traction coupling device |
See. Specifications to Head Governing bodies and receptions of safe operation
|
Efforts of a tightening of carving connections, Nanometer |
Nuts of fastening of levers of screen wipers |
|
18 |
|
15 |
Screws of fastening of levels of loops of a cowl |
|
10 |
|
18 |
Screws of fastening of the top and bottom assemblies of the lock of a cowl |
12 |
Nuts of fastening of a dividing pipe to elements of the bottom protection of an impellent compartment (front bumper) |
86 |
Screws of fastening of basic arms of a front bumper to elements of the bottom protection |
25 |
Bolts of fastening of forward protection to the bottom protection |
25 |
Nuts of fastening of elements of the bottom protection to basic arms |
49 |
Bolts of fastening of elements of the bottom protection to each other |
49 |
Bolts of fastening of back section of the bottom protection of an impellent compartment to an auxiliary frame |
10 |
Nuts of fastening of a front bumper to external basic arms and to a frame |
8 |
Nuts and screws of fastening of a rear bumper to a frame |
8 |
Nuts of levels of fastening of mudguards |
6 |
Nuts of fastening of the holder of a spare wheel to a frame beam |
49 |
Screws of fastening of basic arms to the holder of a spare wheel |
25 |
Nuts of fastening of intensifying elements of longitudinal beams of a frame |
49 |
Bolts of fastening of door latches to racks |
24 |
Bolts of fastening of levels of loops of lateral doors |
|
35 |
|
32 |
Nuts of fastening of limiters of opening of doors to doorframes |
10 |
Bolts of fastening of levels of loops of a door of a back |
|
55 |
|
35 |
Screws of fastening of external handles of doors |
|
3 |
|
1.5 |
Screws of fastening of assemblies of door locks |
8 |
Bolts of fastening of the drummer of the lock of a door of a back |
30 |
Anchor bolts of seat belts |
35 |
Screws of fastening of the dashboard to the transmission tunnel |
30 |
Bolts of fastening of eyes of fixing of cargo to the panel of a floor of a luggage compartment |
24 |
Bolts of fastening of anchor brackets of fixing of a children's seat to the panel of a floor of a luggage compartment |
24 |
Bolts of fastening of frames of seats to floor panels |
Forward seats |
40 |
Back seat |
- Release models till 31.08.99
|
35 |
- Release models from 01.09.99
|
40 |
Bolts of fastening of backs of seats to frames |
30 ± 3 |
Screws of fastening of returnable devices of back seat belts to seats |
40 |
Bolts of fastening of buckles of seat belts |
Forward seats |
- Release models till 31.08.99
|
35 |
- Release models from 01.09.99
|
45 |
Back seats |
35 |
Wheel bolts |
150 |
Bolts of fastening of the traction coupling device to a cross-section beam of a frame |
160 |
In view of limitation of a place in the present Chapter the most interesting procedures from the point of view of the originators which performance is obviously possible strengths of the average amateur mechanic are considered only. It is necessary to charge more difficult works to performance of specialists of car-care center.