Repair and service Mercedes Benz M - the Class W163 - Replacement of brake hoses//since 1997 of release / mehanicm.ru

Mercedes M-Class W163

since 1997 of release

Repair and car operation



Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
+ Transmission line
- Brake and auxiliary systems
   General information and security measures
   Check of brake system on leaks
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Check of the transient valve
   Removal and installation of the main brake cylinder
   Removal and installation of the vacuum amplifier of brakes and sensor of a course of a diaphragm of BAS
   Removal and ETS/ESP hydromodulator installation
   Removal and installation of the hydraulic lines laid between GTTs and the ETS/ESP hydromodulator
   Assessment of degree of wear and replacement of brake shoes
   Replacement of brake hoses
   Removal and support installation
   Removal and installation of a brake disk
   Replacement of boots of the parking brake
   Pumping of brake system
   Removal and installation of pedal knot and sensor switch of stoplights
   Removal and installation of a pedal of raising of the parking brake
   Removal and installation of hummock assembly of a drive of the parking brake
   Adjustment of a drive of the parking brake
   Removal and installation of wheel ABS/ETS/ESP sensors
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



Replacement of brake hoses

Details of installation of a flexible hose of the brake mechanism of a forward wheel (on an example of the models equipped with supports of floating type)

Details of installation of a flexible hose of the brake mechanism of a back wheel (on an example of the models equipped with supports of floating type)


 PERFORMANCE ORDER

  1. Details of installation of brake hoses are shown on illustrations which all references meeting in the text concern.
  2. Disconnect from a hose (5) brake line (51), - at once закупорьте the open end of the brake line.
  3. At work on brake mechanisms of forward wheels liberate from a clamp on a hose (51) electroconductings from sensors of wear of blocks and frequency of rotation of wheels, then turn out a hollow bolt of the shtutserny socket and disconnect a hose from a support.
  4. At work on brake mechanisms of forward wheels disconnect a hose, having turned out the union from a support.
  5. Installation is made upside-down, - do not forget to replace sealing washers of shtutserny sockets.
  6. In summary modify level of hydraulic liquid and pump over brake system (see. Section Pumping of brake system).