Mercedes M-Class W163

since 1997 of release

Repair and car operation



Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
- Governing bodies and receptions of safe operation
   First 1500 km
   + Access, protection
   + Elements of systems of safety
   + car Equipment, arrangement of devices and governing bodies
   + Comfort
   - Receptions of operation and auxiliary systems
      General information
      Running in of the new car
      Features of operation of the cars equipped with the three-functional catalytic converter
      Car parking
      Start of motion and gear shifting
      Control systems of speed (Tempostat/Speedtronic)
      Parktronic (PTS) system
      Amplifier of emergency braking (BAS)
      System of anti-blocking of brakes (ABS)
      Antiprobuksovochny system (4-ETS)
      Electronic protivozanosny system (ESP)
      Electronic system of distribution of brake forces (EBV)
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



Amplifier of emergency braking (BAS)

The amplifier of emergency braking is not capable to prevent risk of loss of coupling of wheels with a paving at drifts on turns and hydroplaning.


BAS promotes reduction of a brake way at emergency braking of the car, and also provides completeness of return of ABS, ETS and ESP systems (see below).

At sharp squeezing of a pedal of a foot brake of BAS provides the maximum strengthening of a brake drive, - if there is a need for further braking of the car, do not weaken effort of pressing to a pedal. At an otpuskaniye of a pedal of a foot brake of BAS it is disconnected automatically.

At power failure of an onboard food is lower 10 In there is a shutdown of the BAS amplifier, - on the dashboard the corresponding control lamp lights up (for BAS and ESP systems the general control lamp - is used see. Section Combination of devices, measuring instruments and control lamps and light indicators). Increase of level of tension automatically normalizes a situation.