Repair and service Mercedes Benz M - the Class W163 - Removal and installation of the cylinder of the lock of ignition//since 1997 of release / mehanicm.ru

Mercedes M-Class W163

since 1997 of release

Repair and car operation



Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
+ Transmission line
+ Brake and auxiliary systems
- Suspension bracket and steering
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Filling and "pumping" of the steering pump
      Check of a pressure of the steering pump
      Replacement of a collar of fastening of a hose of a path of cooling of GUR liquid
      Assessment of a condition of hinges of steering drafts and boots of a case of reechny transfer
      Removal and installation of the steering pump
      Replacement of boots of a case of the steering mechanism
      Removal and installation of tips of steering draft
      Removal installation of entrance knot of the steering mechanism
      Removal and installation of the steering mechanism
      Dismantling of a mechanical regulator of a steering column
      Removal and installation of a steering wheel and spiral contact drum of a steering column
      Removal and installation of the cylinder of the lock of ignition
      Removal and installation of the lock of blocking of a steering column
      Removal and installation and shirts of a steering column
   + suspension bracket Geometry
+ Body
+ Onboard electric equipment



Removal and installation of the cylinder of the lock of ignition

When jamming key in the lock cylinder сбрызните the last special spray, - if greasing will not help, it is necessary to replace the cylinder.

Details of installation of the cylinder of the lock of ignition are shown on illustrations which all references meeting in the text concern.

Details of installation of the cylinder of the lock of ignition

Details of installation of the cylinder of the lock of ignition

Details of installation of the cylinder of the lock of ignition

Details of installation of the cylinder of the lock of ignition

Details of installation of the cylinder of the lock of ignition

Details of installation of the cylinder of the lock of ignition

Removal

 PERFORMANCE ORDER

  1. By means of a suitable hook remove from the lock cylinder the coil of a transponder (L11).
  2. Turn a key in the lock in situation 1, then it is a little more (before click).
  3. Having turned a cover (36b) on 90 ° counter-clockwise, remove the lock (36) cylinder.

Installation

 PERFORMANCE ORDER

  1. Grease the cylinder (36) with special greasing and plant it in a cover (36b).
  2. Pass a key through a cover (36b) and against the stop enter it into the lock cylinder, - cams should be cleaned completely.
  3. Fill the cylinder (36) in zamkovy assembly, - track, that uvulas (shooter) of the cylinder (36) were combined with deepenings in the lock (shooter).
  4. By means of an opravka (011) develop a cover (36b) on 90 ° clockwise before clamp click.
  5. Turn a key in the cylinder in situation 0 and remove an opravka (011).
  6. Plant on the cylinder (36) the coil of a transponder (L11).