Mercedes M-Class W163

since 1997 of release

Repair and car operation


Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
+ Transmission line
+ Brake and auxiliary systems
- Suspension bracket and steering
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Filling and "pumping" of the steering pump
      Check of a pressure of the steering pump
      Replacement of a collar of fastening of a hose of a path of cooling of GUR liquid
      Assessment of a condition of hinges of steering drafts and boots of a case of reechny transfer
      Removal and installation of the steering pump
      Replacement of boots of a case of the steering mechanism
      Removal and installation of tips of steering draft
      Removal installation of entrance knot of the steering mechanism
      Removal and installation of the steering mechanism
      Dismantling of a mechanical regulator of a steering column
      Removal and installation of a steering wheel and spiral contact drum of a steering column
      Removal and installation of the cylinder of the lock of ignition
      Removal and installation of the lock of blocking of a steering column
      Removal and installation and shirts of a steering column
   + suspension bracket Geometry
+ Body
+ Onboard electric equipment

Removal and installation of tips of steering draft

In total самоконтрящиеся bolts and nuts are subject to replacement without fail!

External tip

Details of installation of an external tip of steering draft


 PERFORMANCE ORDER

  1. Details of installation of an external tip of steering draft are shown on an illustration which all references meeting in the text concern.
  2. By means of a suitable stripper liberate the hinge of a tip of steering draft (10а) from a rotary fist.
  3. Having fixed a tip motionlessly (shooter), release a lock-nut (10i), the nut is subject to replacement without fail.
  4. Previously having marked its adjusting situation, remove a tip (10).
  5. Installation is made upside-down, - track correctness of combination of the labels put in the course of dismantle.

Internal tip

Removal/installation of an internal tip of steering draft

Left draft

Left draft

Right draft


 PERFORMANCE ORDER

  1. The corresponding illustrative material is presented on an illustration which all references meeting in the text concern.
  2. Remove an external tip (see above).

At service of the right draft remove also left boot.

  1. Holding a lath motionlessly rozhkovy key on 24 mm, put on on special лыски, by means of a rozhkovy nozzle on 36 or 38 mm (012) turn out the hinge of an internal tip (12a/12b), - it is not necessary to apply extension pieces to the handle of a key or to use a sledge hammer.
  2. Installation is made upside-down.