Mercedes M-Class W163

since 1997 of release

Repair and car operation


Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
- Power supply system and production of the fulfilled gases
   - Power supply system of petrol engines
      Check and adjustment of quantity of turns of the single course/the moment of ignition/concentration WITH
      Sbrasyvaniye of pressure in fuel system of the petrol engine
      Principle of functioning of a control system and injection of the petrol engine
      General check of system of injection of the petrol engine
      Check of injectors
      Removal and installation of components of an inlet air path
      Service of elements of a drive of a butterfly valve
      Oporozhneniye of a fuel tank
      Removal and installation of assembly of the fuel pump with the sensor of a stock of fuel
      Removal and installation of the locking fuel valve (only American models)
      Removal and installation of the fuel distributive highway and injectors
      Removal and installation топливопровода, going from the fuel filter to the fuel highway, - models 163.154.157/172/174/175
      Removal and installation of a fuel tank
   + Power supply system of diesel engines
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Removal and installation of components of an inlet air path

Models 163.136

Air inlet

Details of installation of an air inlet on models 163.136 (the series 111 engine)

4/16 — the Air inlet
Arrow — the Clamp

Details of installation of an air inlet on models 163.136 (the series 111 engine) are shown on an illustration, - previously remove a front grille (see. Head Body).

Air purifier

Details of installation of an air purifier on models 163.136 (the series 111 engine)

Shooters — Rubber pillows

Details of installation of an air purifier on models 163.136 (the series 111 engine) are shown on an illustration, - do not forget to liberate a hose of an okhladitelny path from directing on the air purifier case.

Sensor of measurement of weight of air (MAF)

Details of installation of the MAF sensor on models 163.136 (the series 111 engine)

B2/5 — the MAF Sensor

Details of installation of the MAF sensor on models 163.136 (the series 111 engine) are shown on an illustration, - do not forget to replace a sealing ring.

Bypass air purifier sleeve

Details of installation of a bypass air sleeve on models 163.136

4/5 — Bypass an air purifier sleeve
В17 — the Sensor of the air temperature, submitted to salon

Shooters — Fixing clamps

Details of installation of a bypass air sleeve on models 163.136

Shooters — Fixing clamps

Details of installation of a bypass air sleeve on models 163.136

Shooters — Fixing clamps

Details of installation of a bypass sleeve of an air purifier on models 163.136 (the series 111 engine) are shown on illustrations.

Models 163.154/157

Details of installation of components of an inlet air path on models 163.154/157 (series 112 engines)

1/2 — the Right line of ventilation of a case
2 — the Air purifier
2/1 — Rezonatornaya the chamber

2/2 — the Air line
2/3 — the Bolt
B2/45 — the MAF Sensor

Details of installation of components of an inlet air path on models 163.154/157 (series 112 engines) are shown on an illustration. Before removal of an air sleeve (2/2) it is necessary to disconnect a cable of a drive of an electronic accelerator (shooter), - wring out a screw-driver down a lock uvula of a clamp of fastening of an air sleeve (2/2) to the actuation mechanism of an electronic accelerator.

Models 163.172/174/175

Details of installation of components of an inlet air path on models 163.172/174/175 (series 113 engines)

1 — the Cover of a broad tank of system of cooling
2 — Perelivnaya a tube
3 — the Line of an okhladitelny path
4 — the Line of an okhladitelny path
5 — the Line of an okhladitelny path
6 — the Contact socket
7 — the Broad tank
8 — the Vacuum hose of system of ventilation of a case

9 — the Air line
9/1 — the Bolt
10 — the Air purifier
11 — an air line Clamp
12 — Rezonatornaya the chamber
13 — the Contact socket of electroconducting of the MAF sensor
B2/5 — the MAF Sensor


 PERFORMANCE ORDER

  1. Details of installation of components of an inlet air path on models 163.172/174/175 (series 113 engines) are shown on an illustration which all references meeting in the text concern.
  2. Having opened a cover (1), dump superfluous pressure in a broad tank of system of cooling (7).
  3. Disconnect from a broad tank (7) perelivny tube (2).
  4. Disconnect from a broad tank (7) lines (3, 4 and 5) an okhladitelny path.
  5. Remove a broad tank (7).
  6. Disunite the contact socket (6) of the MAF sensor (B2/5).
  7. Disconnect a vacuum hose (8) systems of ventilation of a case.
  8. Having turned out a bolt (9/1), separate an air sleeve (9) from a cover of a head of cylinders.
  9. Remove from an air purifier (10) MAF sensor (B2/5).
  10. Wring out a screw-driver down the blocking mechanism (11) of an air sleeve.
  11. Remove the rezonatorny chamber (12).
  12. Remove a sleeve (9) assembled with the MAF sensor (B2/5).
  13. Installation is made upside-down.