Mercedes M-Class W163

since 1997 of release

Repair and car operation


Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
- Power supply system and production of the fulfilled gases
   - Power supply system of petrol engines
      Check and adjustment of quantity of turns of the single course/the moment of ignition/concentration WITH
      Sbrasyvaniye of pressure in fuel system of the petrol engine
      Principle of functioning of a control system and injection of the petrol engine
      General check of system of injection of the petrol engine
      Check of injectors
      Removal and installation of components of an inlet air path
      Service of elements of a drive of a butterfly valve
      Oporozhneniye of a fuel tank
      Removal and installation of assembly of the fuel pump with the sensor of a stock of fuel
      Removal and installation of the locking fuel valve (only American models)
      Removal and installation of the fuel distributive highway and injectors
      Removal and installation топливопровода, going from the fuel filter to the fuel highway, - models 163.154.157/172/174/175
      Removal and installation of a fuel tank
   + Power supply system of diesel engines
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Removal and installation of assembly of the fuel pump with the sensor of a stock of fuel

Details of installation of assembly of the fuel pump with the sensor of a stock of fuel (all models)

And — Arms of a frame of a back seat

Arrow — the Contact socket of electroconducting of the fuel pump


 PERFORMANCE ORDER

  1. Details of installation of assembly of the fuel pump are shown on an illustration which all references meeting in the text concern.
  2. Empty a fuel tank (see. Undressed Oporozhneniye of a fuel tank).
  3. Having executed procedures of paragraphs with 2 on 6 Undressed Oporozhneniye of a fuel tank, uncover (84) windows of access to assembly of the fuel pump/sensor of a stock of fuel.
  4. Disunite the contact socket (shooter) of electroconducting of the fuel pump.
  5. Disconnect from pump assembly of the line of giving (90/12) and return (90/11) fuels, at the corresponding complete set disconnect also топливопровод a stationary heater (90/13), - try not to allow peregibaniye топливопроводов.

If the stationary heater is not established, do not make attempts to twist the screw of the connecting union.

  1. By means of a suitable key release a ring nut (89).

The ring nut is subject to replacement without fail.

  1. Accurately take assembly of the fuel pump/sensor of a stock of fuel (M3/B4) from a fuel tank, - try not to bend the lever of a float of the sensor.

The pump with the sensor are united in uniform knot not subject to dismantling!

  1. Installation is made upside-down, - oil a sealing element (89/2).