Mercedes M-Class W163

since 1997 of release

Repair and car operation


Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
- Power supply system and production of the fulfilled gases
   - Power supply system of petrol engines
      Check and adjustment of quantity of turns of the single course/the moment of ignition/concentration WITH
      Sbrasyvaniye of pressure in fuel system of the petrol engine
      Principle of functioning of a control system and injection of the petrol engine
      General check of system of injection of the petrol engine
      Check of injectors
      Removal and installation of components of an inlet air path
      Service of elements of a drive of a butterfly valve
      Oporozhneniye of a fuel tank
      Removal and installation of assembly of the fuel pump with the sensor of a stock of fuel
      Removal and installation of the locking fuel valve (only American models)
      Removal and installation of the fuel distributive highway and injectors
      Removal and installation топливопровода, going from the fuel filter to the fuel highway, - models 163.154.157/172/174/175
      Removal and installation of a fuel tank
   + Power supply system of diesel engines
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

General check of system of injection of the petrol engine

 PERFORMANCE ORDER

Special devices are necessary for systematic search of malfunctions and their elimination. Such devices very expensive and, as a rule, are available only on HUNDRED. Therefore the description only verifications of the general plan below is provided.

  1. Check a condition of the storage battery (see. Heads Current leaving and service and Systems of electric equipment of the engine).
  2. Check a condition of all safety locks (see. Head Onboard electric equipment).
  3. Disunite and again join all sockets of the relevant electronic systems. Check reliability of fixing of sockets and cables in an impellent compartment.
  4. Check reliability of fastening of all connections of weight.
  5. Check tightness of hoses and pipelines, special attention giving to identification of cracks. Replace defective components, tighten weakened shtutserny sockets.