Mercedes M-Class W163

since 1997 of release

Repair and car operation



Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
- Power supply system and production of the fulfilled gases
   - Power supply system of petrol engines
      Check and adjustment of quantity of turns of the single course/the moment of ignition/concentration WITH
      Sbrasyvaniye of pressure in fuel system of the petrol engine
      Principle of functioning of a control system and injection of the petrol engine
      General check of system of injection of the petrol engine
      Check of injectors
      Removal and installation of components of an inlet air path
      Service of elements of a drive of a butterfly valve
      Oporozhneniye of a fuel tank
      Removal and installation of assembly of the fuel pump with the sensor of a stock of fuel
      Removal and installation of the locking fuel valve (only American models)
      Removal and installation of the fuel distributive highway and injectors
      Removal and installation топливопровода, going from the fuel filter to the fuel highway, - models 163.154.157/172/174/175
      Removal and installation of a fuel tank
   + Power supply system of diesel engines
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Removal and installation of the fuel distributive highway and injectors

Models 163.136

Details of installation of the fuel highway on models 163.136 (the series 111 engine)

1/1 — the Service valve
16/8 — the Sealing ring
17 — the Fuel highway

17/2 — the Line of return of fuel
17/3 — the Line of supply of fuel
Y62 — the Injector

Details of installation of fuel injectors on models 163.136 (the series 111 engine)

16/7 — the Antirotational lock

Arrow — a 4-final nozzle


 PERFORMANCE ORDER

  1. Details of installation of the fuel distributive highway and injectors on models 163.136 (the series 111 engine) are shown on an illustration and an illustration Location of the service valve (1/1) dumpings of pressure on the fuel highway of the engine of a series 111. Location of the service valve (1/1) dumpings of pressure on the fuel highway of the engine of a series 111 which all references meeting in the text concern.
  2. Remove bypass an air purifier sleeve (see. Section Removal and installation of components of an inlet air path).
  3. Dump pressure in a power supply system via the service valve (see. Undressed Sbrasyvaniye pressure in fuel system of the petrol engine).
  4. Turn out fixing bolts and remove the fuel highway (17).
  5. Disconnect lines of return (17/2) both supply (17/3) fuels and electroconducting of injectors (Y62)
  6. In case of need remove fuel injectors (Y62).
  7. Installation is made upside-down, - do not forget to replace sealing rings (16/8 and 16/9) which before installation should be oiled.

Models 163.154/157/172/174

Details of installation of fuel injectors on models 163.154/157/172/174 (the series 111 engine)

16/7 — the Antirotational lock

Arrow — a 4-final nozzle


 PERFORMANCE ORDER

  1. Details of installation of the fuel distributive highway and injectors on models 163.154/157/172/174 (engines of series 112 and 113) are shown on an illustration and an illustration Location of the service valve (1/1) dumpings of pressure on the fuel highway of engines of series 112 and 113 which all references meeting in the text concern.
  2. Remove the panel of furnish of a cover of a head cylinders/air purifier.

On models with the air purifier fixed on the engine remove the rezonatorny chamber (2/1).

  1. Turn out screws (1/4) and remove a plastic cover.
  2. Dump pressure in a power supply system via the service valve (see. Undressed Sbrasyvaniye pressure in fuel system of the petrol engine).
  3. Disconnect the line of supply of fuel (17/2).
  4. Disconnect electroconducting from injectors (Y62).
  5. Turn out fixing screws (17/1) and remove assembly of the fuel highway (17) with injectors (Y62) from the inlet pipeline.
  6. In case of need remove injectors.
  7. Installation is made upside-down, - do not forget to replace sealing rings (16/8 and 16/9) which before installation should be oiled.