Repair and service Mercedes Benz M - the Class W163 - Visual control of a seat belt and the safety cushion block//since 1997 of release / mehanicm.ru

Mercedes M-Class W163

since 1997 of release

Repair and car operation



Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
- Current leaving and service
   Active system of the prevention of term of approach planned THAT (ASSYST)
   Schedule of routine maintenance
   General information on settings
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure in them, designation of tires and disks of wheels, rotation of wheels
   Replacement of impellent oil and oil filter
   Check of brake system
   Power supply system check, replacement of the fuel filter
   Check of a condition and replacement of hoses of an impellent compartment, localization of leaks
   Check of a condition of multicostal belts of a drive of auxiliary units
   Check of functioning of system of cooling and frost resistance of cooling liquid, liquid replacement
   Check of a condition of system of production of the fulfilled gases
   Replacement and check of level of ATF, AT filter replacement
   Visual check of tightness of automatic transmission
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of boots of power shafts
   Check of central air of air
   Greasing of limiters of doors and cylinders of locks
   Visual control of a seat belt and safety cushion block
   Check of operability of headlights and horn
   Check of a condition and replacement of brushes of screen wipers
   Check of a condition of the battery, care of it and charging
   Replacement of the salonny filter
   Replacement of brake liquid
   Check and replacement of spark plugs, check of a condition of high-voltage wires (petrol models)
+ Engine
+ Systems of cooling, heating and air conditioner
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



Visual control of a seat belt and safety cushion block

 PERFORMANCE ORDER

  1. Completely extend a seat belt and check a tape on existence of the damaged threads).

    Check a belt tape on existence of the damaged threads

  2. Damages can be a consequence, for example, jammings of a belt or influence of a burning cigaret. In this case it is necessary to replace a belt.
  3. In the presence of retyrannies without signs of damage of threads to replace a belt it is not necessary.
  4. The belt having a heavy course, it is necessary to check on twisting. If necessary it is necessary to remove facing on the central rack.
  5. If the machine gun of taking-up does not work, a belt it is necessary to replace (work HUNDRED).
  6. The tape of a belt can be cleared only soap and water. At all it is not necessary to apply for this purpose solvents or chemical cleaners.
  7. Check installation sites of safety cushions on existence of damages.
  8. Surface of a steering wheel and panels under which knots of inflatable safety cushions are located, clean the dry or moistened water a rag.

It is not allowed to paste over or fit any material a steering wheel and a surface of the forward panel on the right.