Removal and installation of auxiliary ventilyatorny assembly, - models 163.136/154/157/172 of the corresponding complete set
Details of installation of auxiliary ventilyatorny assembly (at the corresponding complete set)
|
|
- Details of installation of auxiliary ventilyatorny assembly are shown on an illustration which all references meeting in the text concern.
- Remove the top forward cross-section beam of a frame (1).
- Turn out fixing bolts (2) and disunite the contact socket (М4x1).
- Liberate a plait of electroconducting of the sensor of temperature of external air from clamps on auxiliary ventilyatorny assembly (М4).
- Having pulled up, take ventilyatorny assembly (М4) from an impellent compartment.
- Installation is made upside-down, - track correctness of landing of ventilyatorny assembly in the bottom directing.
|
|
|