Mercedes M-Class W163

since 1997 of release

Repair and car operation

Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
+ Transmission line
+ Brake and auxiliary systems
- Suspension bracket and steering
   - Forward suspension bracket
      Removal and installation of assembly of the forward bridge
      Removal, check and installation of forward shock-absorbers
      Removal and installation of a torsionny bar
      Removal and installation of torsionny springs
      Removal and installation of the bottom cross-section lever, replacement of the forward axial plug
      Removal and installation of the top cross-section lever
      Check of a condition of spherical support of a rotary fist
   + Back suspension bracket
   + Steering
   + suspension bracket Geometry
+ Body
+ Onboard electric equipment

Removal and installation of the top cross-section lever

Details of installation of the top cross-section lever of a forward suspension bracket

PERFORMANCE ORDER

Details of installation of the top cross-section lever of a forward suspension bracket are shown on an illustration which all references meeting in the text concern.

Remove the corresponding forward wheel.

Remove the shock-absorber (see. Section Check of the transient valve).

Liberate from a clamp on a rotary fist the brake line.

By means of an ex-tractor liberate from the lever (6) the top spherical support and tie up a rotary fist to the fixed elements of a suspension bracket.

Disconnect the top lever (6) from a car frame.

Installation is made upside-down, - the final tightening of elements of fastening of the lever is made after car lowering on the earth.

In summary make adjustment of geometry of a suspension bracket.