Mercedes M-Class W163

since 1997 of release

Repair and car operation


Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ the Power supply system and production of the fulfilled gases
- Systems of electric equipment of the engine
   + ignition and engine management Systems
   + System of preheat of the diesel engine
   + Diagnostics of systems of electronic control and diagnostic equipment
   - Charge and start systems
      General information
      The storage battery - the general information, recommendations about service
      Charge system - general information and security measures
      Check of system of a charge
      Removal and generator installation
      Removal and installation of a driving pulley of the generator
      Removal and installation of a regulator of tension
      System of start of the engine - the general information and precautionary measures
      Removal and starter installation
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Removal and installation of a regulator of tension

Details of installation of a regulator of tension


 PERFORMANCE ORDER

  1. Details of installation of a regulator of tension are shown on an illustration. Which all references meeting in the text concern.
  2. Remove the generator (see. Section Removal and generator installation).
  3. Turn out screws (1), release clamps (3) and uncover generating assembly (2).
  4. Turn out fixing screws (4) and remove a regulator of tension (5), having pulled it aside.
  5. Installation is made upside-down, - track correctness of connection of an element of grounding (6).