Mercedes M-Class W163

since 1997 of release

Repair and car operation

Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
- Governing bodies and receptions of safe operation
   First 1500 km
   + Access, protection
   + Elements of systems of safety
   - Car equipment, arrangement of devices and governing bodies
      The dashboard and the central console - the general information
      Combination of devices, measuring instruments and control lamps and light indicators
      Governing bodies and salon equipment
      Equipment of a luggage compartment
      Replacement of brushes of screen wipers
   + Comfort
   + Receptions of operation and auxiliary systems
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Equipment of a luggage compartment

Appearance of a luggage compartment is shown on an illustration.

Luggage car offices

First-aid kit and sign of an emergency stop

The regular first-aid kit is equipped in the left ware box of a door of a back of the car, - the folding cover of a box is marked with the pictogram with the image of a white cross on a dark blue background. Periodically check completeness of contents of the first-aid kit.

The sign of an emergency stop is located in the right ware box of a door of a back of the car, - the folding cover of a box is marked with the pictogram with the image of an exclamation mark.

Location of ware boxes under storage of the first-aid kit (1) and a sign of an emergency stop (2)

Spare wheel, jack and the compressor for pumping of tires

The description of regular places of storage of a spare wheel, jack (with a ballonny key) and the compressor for a rating of tires is provided in Introduction to the real Management.

Safety grid

In case of need the safety grid can be tense behind forward seats, or behind a back many-placed seat, - cast away down decorative covers of fixing elements, hang a grid.

Details of installation of the upper edge of a safety grid

1 — the Top elements of fastening of a grid are equipped with folding protective covers

Having hung a grid on the top fixing elements, hook on hooks of the bottom fixing belts for special anchor brackets on the panel of a floor of the car, then pull belts by means of coupling locks.

Details of fastening of bottom edge of a safety grid (at installation behind forward seats – the coupling lock of a belt is closed by a grid)

2 — the Hook of a fixing belt
3 — the Anchor bracket

Details of fastening of bottom edge of a safety grid (at installation behind a back many-placed seat)

2 — the Hook of a fixing belt
3 — the Anchor bracket
4 — the Coupling lock

Reliability of a tension of a grid should be checked later short time, - in case of need tighten fixing belts.

Transportation of passengers on the seats located behind the tense grid is not allowed!

Removal of a grid is made upside-down. The regular place for storage of the braided safety grid is provided behind a many-placed back seat.

Horizontal shtorka

Installation of a back horizontal shtorka is represented possible only at the cleaned folding seats of the additional third row (see. Section Adjustment of seats).

The casing of a horizontal shtorka is mounted in a raspor in a forward part of a luggage compartment, - after casing introduction in reception deepenings it is necessary to wring out the button of an otpuskaniye of a clamp and to take away outside a mobile fixing element. Further the shtorka is extended through a back groove of a casing and fixed in special holders near a back doorway.

For removal of a shtorka liberate it from back holders, and, holding for a loop, wind in a casing. Further, shift inside to a zashchelkivaniye a mobile fixing element and liberate shtorka assembly from reception deepenings in panels of a lateral upholstery in a forward part of a luggage compartment

Details of fixing of a casing of a shtorka in a forward part of a luggage compartment (for fixing of a casing to wring out the button of an otpuskaniye of a clamp (1) and to shift a mobile fixing element in the direction opposite specified arrow)

Details installation of a back horizontal shtorka

1 — Back holders

Floor covers

On the panel of a floor of the car under assembly of a many-placed back seat demountable covers are provided. Before removal of covers it is necessary to dismantle folding seats of the additional third row (see. Section Adjustment of seats).

Combine a back of a many-placed seat and cast away a floor cover forward, - the otpuskaniye of clamps of covers occurs automatically.

The removed covers develop half-and-half and are located in pockets on backs of folding back seats of the additional third row.

Before an ubiraniye in pockets of backs of folding seats of the third additional row the removed covers of a floor of a luggage compartment develop half-and-half

Ubiraniye of the combined cover in a pocket of a back of a folding back seat

2 — the Fastener of a pocket (Velkro type), - to unbutton
3 — a floor Cover

For cover installation into place it is necessary to pass a hand in a special service opening and to fill directing pins in reception nests, - the button of an otpuskaniye of clamps should be latched.

Elements for cargo fixing

Special brackets on the floor panel, - two behind assemblies of forward seats and four it is direct in a luggage compartment.

Bracket for cargo fixing

Options of fastening of cargo at various placement are given in illustrations.

Options of placement of cargo

Options of fastening of transported cargo

Four more fixing elements for fixing of easy cargo are provided on walls of a luggage compartment.

Hooks for fixing of easy cargo