Mercedes M-Class W163

since 1997 of release

Repair and car operation



Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
- Body
   - External equipment and body elements
      Removal and installation of levers of screen wipers
      Removal of a drive of forward screen wipers
      Removal and installation of the sliding telescopic snuffled faroomyvatel
      Removal, installation and cowl adjustment
      Replacement of loops of a cowl
      Removal and installation of an emblem of Mercedes
      Removal, installation and service of components of the lock of a cowl
      Removal and installation of a gas-filled emphasis of fixing of a cowl in open situation
      Removal and installation of the tank of washing liquid
      Removal and installation of a front bumper
      Removal and installation of the top forward cross-section beam of a frame
      Removal and installation of panels of the bottom protection of an impellent compartment
      Removal and installation of a rear bumper
      Removal and installation of the external holder of a spare wheel (at the corresponding complete set)
      Removal and installation of loker of protection of wheel arches
      Removal and installation of doors
      Removal and installation of limiters of opening of lateral doors
      Removal and installation of loops of a door of a back
      Removal and installation of a gas-filled sliding emphasis of a door of a back
      Removal and installation of external handles of doors
      Removal and installation of panels of an internal upholstery of door assemblies
      Removal and installation of door locks
      Removal and installation of door rear-view mirrors
   + salon Equipment
+ Onboard electric equipment


Removal, installation and service of components of the lock of a cowl

Lock

Details of installation of components of the lock of a cowl

Release models till 31.08.99

Release models from 01.09.99

Scheme of drawing of greasing (release model till 31.08.99)

Scheme of drawing of greasing (release model from 01.09.99)


 PERFORMANCE ORDER

  1. Details of installation of components of the lock are shown on an illustration which all references meeting in the text concern.
  2. Open a cowl and fix it in vertical situation.
  3. Turn out screws (1) and, having pulled up, remove the bottom section (2) of zamkovy assembly.
  4. Remove the lever of an otpuskaniye of a latch in at the left under the dashboard in salon of the car and disconnect from it a driving cable (models till 31.08.99) / disunite the contact socket of electroconducting (4) (models from 01.09.99).
  5. Disconnect a cable of an otpuskaniye of a latch (3) from the bottom section (2) of zamkovy assembly and remove the last from a cross-section beam.
  6. Turn out screws (4 and 5) and remove the top section (6) of the lock, on models till 31.08.99 equipped with a safety clamp.
  7. Installation is made upside-down.
  8. In summary adjust the provision of a cowl (see. The section Removal, installation and cowl adjustment), make sure of reliability of its fixing in a closed position and grease with konsistentny greasing open elements of zamkovy assembly (including a safety hook) and loops. Check freedom and smoothness of a course of a safety hook.

Cable of an otpuskaniye of a zamkovy latch

Details of installation of a driving cable of an otpuskaniye of a latch of the lock of a cowl


 PERFORMANCE ORDER

  1. Details of installation of a driving cable of an otpuskaniye of a latch of the lock of a cowl are shown on an illustration which all references meeting in the text concern.
  2. Open a cowl and fix it in vertical situation.
  3. Remove the top cross-section beam of a frame (see. Section Removal and installation of the top forward cross-section beam of a frame).
  4. Remove the cowl lock (see above).
  5. Liberate a driving cable from intermediate clamps under the top cross-section beam of a frame.
  6. Turn out fixing screws / release clamps and uncover the assembly block of safety locks/relay (see. Head Onboard electric equipment).
  7. In case of need remove intermediate clamps (1) laying of a driving cable.
  8. Uncover at the left under the dashboard (see. Section Removal and installation of the bottom covers of the dashboard).
  9. Remove panels of furnish of the left foot well (see. Section Removal and installation of panels of furnish of forward foot wells).
  10. Liberate a driving cable from a clamp on a well wall.
  11. Remove the plug through passage (2) cables from the assembly block of safety locks/relay.
  12. Involve a driving cable (3) through a partition in an impellent compartment.
  13. Installation is made upside-down, - track correctness of laying of a cable.