Mercedes M-Class W163

since 1997 of release

Repair and car operation



Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
- Body
   - External equipment and body elements
      Removal and installation of levers of screen wipers
      Removal of a drive of forward screen wipers
      Removal and installation of the sliding telescopic snuffled faroomyvatel
      Removal, installation and cowl adjustment
      Replacement of loops of a cowl
      Removal and installation of an emblem of Mercedes
      Removal, installation and service of components of the lock of a cowl
      Removal and installation of a gas-filled emphasis of fixing of a cowl in open situation
      Removal and installation of the tank of washing liquid
      Removal and installation of a front bumper
      Removal and installation of the top forward cross-section beam of a frame
      Removal and installation of panels of the bottom protection of an impellent compartment
      Removal and installation of a rear bumper
      Removal and installation of the external holder of a spare wheel (at the corresponding complete set)
      Removal and installation of loker of protection of wheel arches
      Removal and installation of doors
      Removal and installation of limiters of opening of lateral doors
      Removal and installation of loops of a door of a back
      Removal and installation of a gas-filled sliding emphasis of a door of a back
      Removal and installation of external handles of doors
      Removal and installation of panels of an internal upholstery of door assemblies
      Removal and installation of door locks
      Removal and installation of door rear-view mirrors
   + salon Equipment
+ Onboard electric equipment



Removal and installation of loops of a door of a back

Details of installation of loops of a door of a back

1 — the Screw of fastening of a loopy level to the roof panel
2 — Loopy assembly

3 — the Screw of fastening of a loopy level to door assembly


 PERFORMANCE ORDER

  1. Details of installation of loops of a door of a back are shown on an illustration which all references meeting in the text concern.
  2. Mark the provision of levels of loops (2) on door assembly and the roof panel.
  3. Fix a door and turn out screws of fastening of loopy levels to door assembly (3) and panels of a roof (1).
  4. Remove loopy assembly (2).
  5. Installation is made upside-down, - in summary check correctness of landing of a door in a body aperture on size of regional gaps (see. Specifications).