Repair and service Mercedes Benz M - the Class W163 - Removal and installation of a rear bumper//since 1997 of release / mehanicm.ru

Mercedes M-Class W163

since 1997 of release

Repair and car operation



Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
- Body
   - External equipment and body elements
      Removal and installation of levers of screen wipers
      Removal of a drive of forward screen wipers
      Removal and installation of the sliding telescopic snuffled faroomyvatel
      Removal, installation and cowl adjustment
      Replacement of loops of a cowl
      Removal and installation of an emblem of Mercedes
      Removal, installation and service of components of the lock of a cowl
      Removal and installation of a gas-filled emphasis of fixing of a cowl in open situation
      Removal and installation of the tank of washing liquid
      Removal and installation of a front bumper
      Removal and installation of the top forward cross-section beam of a frame
      Removal and installation of panels of the bottom protection of an impellent compartment
      Removal and installation of a rear bumper
      Removal and installation of the external holder of a spare wheel (at the corresponding complete set)
      Removal and installation of loker of protection of wheel arches
      Removal and installation of doors
      Removal and installation of limiters of opening of lateral doors
      Removal and installation of loops of a door of a back
      Removal and installation of a gas-filled sliding emphasis of a door of a back
      Removal and installation of external handles of doors
      Removal and installation of panels of an internal upholstery of door assemblies
      Removal and installation of door locks
      Removal and installation of door rear-view mirrors
   + salon Equipment
+ Onboard electric equipment



Removal and installation of a rear bumper

Models of a standard complete set without the external holder of a spare wheel

Details of installation of a rear bumper on models standard (not AMG) complete sets without the external holder of a spare wheel

And — Covers
In — Nuts

With — Screws


 PERFORMANCE ORDER

  1. Details of installation of a rear bumper on models standard (not AMG) without the external holder of a spare wheel are shown to a complete set on an illustration which all references meeting in the text concern.
  2. At the corresponding complete set disunite located under a lateral overlay of the right rack With in a poddomkrachivaniye point the contact socket of an antenna cable of system of an emergency call (E-call).
  3. Having hooked a suitable wedge, remove covers and give nuts (Е) and screws (C).
  4. At the corresponding complete set release a nut of fastening of a gryazeotboynik.
  5. Having submitted back, accurately remove a bumper, - try not to damage a paint and varnish covering.
  6. At the corresponding complete set remove on the right side of a body the aerial of an emergency call (E-call).
  7. Installation is made upside-down, track correctness of landing of a bumper concerning a door of a back and the back combined lamps.

Models of a standard complete set without the external holder of a spare wheel

Details of installation of a rear bumper on models standard (not AMG) the complete sets, equipped with the external holder of a spare wheel


 PERFORMANCE ORDER

  1. Details of installation of a rear bumper on models standard (not AMG) the complete sets, equipped with the external holder of a spare wheel are shown on сопр. illustrations which all references meeting in the text concern.
  2. At the corresponding complete set disunite located under a lateral overlay of the right rack With in a poddomkrachivaniye point the contact socket of an antenna cable of system of an emergency call (E-call).
  3. Give nuts (And) and (In) on the car bottom behind a cross-section beam of a frame.
  4. Turn out bolts of fastening of console arms (D) holder of a spare wheel.

The bolts fixed by means of nuts (And) can be вытолкнуты from the back party of a cross-section beam.

  1. Remove console arms (D) holder of a spare wheel (see. The section Removal and installation of the external holder of a spare wheel (at the corresponding complete set)).
  2. Carefully remove 3 bamperny panels, - try not to damage a paint and varnish covering and clamps.
  3. At the corresponding complete set give a nut of a back gryazeotboynik.
  4. Having against the stop taken away back the holder запаски, submit back and accurately remove a bumper, - try not to damage a paint and varnish covering.
  5. At the corresponding complete set remove on the right side of a body the aerial of an emergency call (E-call).
  6. Installation is made upside-down, track correctness of landing of a bumper concerning a door of a back and the back combined lamps.

Models of a complete set of AMG

Details of installation of a rear bumper on models of a complete set of AMG


 PERFORMANCE ORDER

  1. Details of installation of a rear bumper on models of a complete set of AMG are shown on сопр. illustrations which all references meeting in the text concern.
  2. At the corresponding complete set disunite located under a lateral overlay of the right rack With in a poddomkrachivaniye point the contact socket of an antenna cable of system of an emergency call (E-call).
  3. Turn out screws (And) fastenings of assembly brackets of an udaropoglotitel to the lower part of a cross-section beam.
  4. Remove a decorative slip (Velkro) and turn out screws (In), located on the upper edge of a bumper.
  5. Having submitted back, accurately remove a bumper, - try not to damage a paint and varnish covering and electroconducting, - at the corresponding complete set remove a rubber sealant at the left on a body and disunite the contact socket of electroconducting of Parktronic system.
  6. At the corresponding complete set remove on the right side of a body the aerial of an emergency call (E-call).
  7. Installation is made upside-down, track correctness of landing of a bumper concerning a door of a back and the back combined lamps.