- Details of installation of the tank of washing liquid are shown on illustrations which all references meeting in the text concern.
- Remove the top cross-section beam of a frame (see. Section Removal and installation of the top forward cross-section beam of a frame).
- Disconnect electroconducting and hoses from pumps (5) of supply of washing liquid and, - at the corresponding complete set, - from the sensor of level of liquid.
- Liberate from a clamp (4) hose (3) refrigerator highways K/V.
- On models 163.128 (ML 400 CDI) remove covers and intermediate clamps of fastening of hoses to the assembly block of safety locks/relay.
- Liberate the heat exchanger of a cooler (10) of the bottom landing plugs.
- By means of the assistant raise a cooler (10), turn out a bolt (2), liberate from landing plugs (6) the tank of washing liquid (1), take away it inside and, having pulled up, take from an impellent compartment.
- Installation is made upside-down, - track completeness of landing of the tank (1) in plugs (6) and reliability of a zashchelkivaniye of a lateral clamp.
|
|