Mercedes M-Class W163

since 1997 of release

Repair and car operation



Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
- Transmission line
   + Coupling
   - Driveshafts
      Removal and installation of the forward driveshaft
      Removal and installation of the back driveshaft
      Removal and installation of the intermediate bearing of a back cranked shaft
   + Power shafts
   + Transfer case and differentials
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Removal and installation of the forward driveshaft

Details of installation of the forward driveshaft


 PERFORMANCE ORDER

Самоконтрящиеся bolts and adjusting washers are subject to replacement without fail!

  1. Details of installation of the forward driveshaft are shown on an illustration which all references meeting in the text concern.
  2. Turn out самоконтрящиеся bolts (70d) driveshaft fastenings to a target flange of a transfer case.
  3. Turn out самоконтрящиеся bolts (70b) driveshaft fastenings to a leading flange of forward differential, remove adjusting washers (70с).
  4. Accurately lower the driveshaft (70), submit it forward and take from under the car.
  5. Estimate degree of wear of the hinge of equal angular speeds (CV JOINT) on the forward end of a shaft and the dual kardanny hinge on back, in case of need replace a shaft assembled.
  6. Installation is made upside-down, - carefully smooth out interface surfaces, track correctness of centering of connecting flanges of sharnirny assemblies of a shaft and a distributing box / forward differential.