Mercedes M-Class W163

since 1997 of release

Repair and car operation


Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ the Power supply system and production of the fulfilled gases
- Systems of electric equipment of the engine
   - Ignition and engine management systems
      Main data and security measures
      Checks of a control system by ignition and injection
      Search of malfunctions - the general information and preliminary checks
      Check and adjustment of a corner of an advancing of ignition
      Spark plugs
      Removal and installation of coils of ignition, - petrol models
      Removal and installation of the sensor of provision of a cranked shaft (CKP)
      Removal and installation of the sensor of provision of a camshaft (CMP), - the series 111 engine
      Removal and installation of the sensor of the Hall of a camshaft, - petrol engines of series 112, 113 and diesel engines of a series 612
      Removal and installation of sensors of a detonation (KS), - petrol engines
   + System of preheat of the diesel engine
   + Diagnostics of systems of electronic control and diagnostic equipment
   + charge and start Systems
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Як відкрити автомийку

Removal and installation of coils of ignition, - petrol models

Before starting performance of procedure familiarize with the list of security measures stated in the Section the Main data and security measures!

М111

Before starting performance of procedure familiarize with the list of security measures stated in the Section the Main data and security measures!

Details of installation of coils of ignition on the engine of a series 111 are shown on an illustration.

Details of installation of dual modules of coils of ignition on the series 111 engine

5/1 — a well Cover under electroconducting of coils of ignition
T1/1 — the Module of coils of ignition of No. No. 1 and 4 cylinders

T1/2 — the Module of coils of ignition of No. No. 2 and 3 cylinders

М112 and 113

Details of installation of coils of ignition on engines of series 112 and 113 (on an example of the 8-cylinder engine)

5/1 — the Tip of the candle socket
5/3 — the Bolt
T1/1 — the Coil of ignition of the cylinder No. 1
T1/2 — the Coil of ignition of the cylinder No. 2
T1/3 — the Coil of ignition of the cylinder No. 3
T1/4 — the Coil of ignition of the cylinder No. 4

T1/5 — the Coil of ignition of the cylinder No. 5
T1/6 — the Coil of ignition of the cylinder No. 6
T1/7 — the Coil of ignition of the cylinder No. 7
T1/8 — the Coil of ignition of the cylinder No. 8
Arrow — the Identification label of a tip


 PERFORMANCE ORDER

  1. Details of installation of coils of ignition on engines of series 112 and 113 are shown on an illustration which all references meeting in the text concern.
  2. Remove panels of furnish of a cover of a head cylinders/air purifier.
  3. Turn out fixing pain (5/3).
  4. Disconnect electroconducting from the corresponding spark plug (5/1).
  5. Disunite the contact socket of electroconducting and remove bobbin assembly (T1/x).
  6. Installation is made upside-down.