Mercedes M-Class W163

since 1997 of release

Repair and car operation

Removal and installation of panels of furnish of body racks

Racks And

Details of installation of the panel of furnish are resistant And (on an example of models of release till 31.08.98)

PERFORMANCE ORDER

Details of installation of the panel of furnish are resistant And shown on an illustration which all references meeting in the text concern. Separate a door sealant (2) around a rack And. On release models till 31.08.98 remove caps (3) and turn out fixing screws (4), in the lower part the panel fastens to the dashboard by means of clamps. On release models from 01.09.98 release the top and bottom clamps of fastening of the finishing panel (1). Remove the panel (1). Installation is made upside-down, - track reliability of a zashchelkivaniye of clamps. At installation of the panel of the new version on release model till 31.08.98 it is necessary to expand slightly screw openings in a rack under installation in them the top clamps.

Racks In

Details of installation of the panel of furnish are resistant In

1 — the Anchor bolt of a seat belt 2 — Samoreza 3 — the Bottom finishing panel	4 — Samoreza 5 — the Top finishing panel 6 — the Regulator of provision of the top anchor knot of a seat belt

PERFORMANCE ORDER

Details of installation of the panel of furnish of a rack In are shown on an illustration which all references meeting in the text concern. Remove an overlay of a threshold of the corresponding door (see. Section Removal and installation of overlays of door thresholds). Separate door a sealant from both parties of a rack of Century. Turn out an anchor bolt (1) seat belt. Turn out screws (2) and remove the bottom panel (3) furnish of a rack. On release models from 01.09.01 remove шильду with marking of SRS and turn out the screw located under it. Turn out screws (4) and, having released clamps, remove the top section (5) of furnish of a rack. Installation is made upside-down, - track correctness of placement of a regulator of the top anchor knot of a seat belt (6) in a reception nest of the finishing panel (5). Make sure of reliability of a zashchelkivaniye of clamps.

Racks of C

Details of installation of the panel of furnish are resistant With

1 — the Screw 2 — Anchor knot of a seat belt 3 — the Remote plug 4 — the Arm	5 — the Cover 6, 7 — Screws 8 — the Finishing panel

PERFORMANCE ORDER

Details of installation of the panel of furnish of a rack With are shown on an illustration which all references meeting in the text concern. At the corresponding complete set remove a seat of the third additional row. Remove a safety network On models ML of 55 AMG remove a casing under storage of a spare wheel. Remove the back ceiling panel, - at the corresponding complete set do not turn out the anchor screw of a seat belt of a seat of the third row. Remove an overlay of a threshold in a luggage compartment of the car. Combine forward a back seat. On models from VIN with А145273, Х708319 remove шильду with marking of SRS and turn out the screw located under it. Turn out the screw (1) and remove the remote plug (3) of anchor knot (2) seat belts of a back seat. Remove from the panel (8) arms (4). Open and uncover (5). Turn out screws (6 and 7), release the top clamps and remove the finishing panel (8), having liberated from it a belt tape. At service of the right rack remove the socket of onboard power supply. Installation is made upside-down, - track reliability of a zashchelkivaniye of clamps.