Mercedes M-Class W163

since 1997 of release

Repair and car operation

Removal, dismantling and installation of the central console

Removal and installation

Details of installation of the central console

PERFORMANCE ORDER

The corresponding illustrative material is presented on an illustration to which all references meeting in the text belong. Remove central an armrest/cover of a console ware box (see. Section Removal and installation of a cover of a console ware box). Turn out forward screws (2) fastenings of a casing of the console (1). Disconnect electroconducting from switches of window regulators of back doors (S21/15s1 and S21/15s2), on release models till 31.08.01 liberate a plait from a basic arm. Disunite the contact socket of electroconducting on the floor panel under the console, on release models till 31.08.01 liberate a plait from a basic arm. Turn out back fixing screws (4) and remove a console (1) casing assembled with the bottom section, having transferred for this purpose the AT selector lever to the situation "N". Installation is made upside-down, - on release models from 01.09.01 make sure of reliability of fixing of an air line.

Dismantling and assembly

Details of installation of components of the central console

1 — the Casing 2 — the Cover 3 — the Ashtray 4 — Chashkoderzhatel 5 — the Cover 6 — the Internal element 7 — the Top section of console assembly	8 — the Bottom section of console assembly S21/15s1 — the Switch of management of functioning of a window regulator of the left back door S21/15s2 — the Switch of management of functioning of a window regulator of the right back door

PERFORMANCE ORDER

The corresponding illustrative material is presented on an illustration to which all references meeting in the text belong. Remove console assembly (see above) and transfer it on a workbench. Remove switches of management of functioning of window regulators of back doors (the cover (2) acts in film outside, switches - from within). Remove a back ashtray (3). Remove a chashkoderzhatel (4). Remove an internal element (6). Turn out six fixing screws and separate top a section/casing (7/1) consoles from bottom (9). Installation of components is made as it should be, the return to an order of their dismantle.