Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
- Автоматичеcкая transmission
Search of malfunctions - the general information
The general principles of functioning of system the transmission, operating signals
Adjustment of a drive of switching of AT
Removal and installation of the electrohydraulic control unit by switchings
Removal and AT installation with the hydrotransformer
Removal and installation of the selector module
Removal and installation of a cable of blocking of the electronic switch of ignition (EIS)
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Removal and installation of the selector module Release models till 31.08.99
Details of installation of the selector module on release models till 31.08.99 (without function of consecutive switching of ranges of movement)
|
|
- On release models the selector module without function of consecutive switching of ranges of movement till 31.08.99 is established. Details of installation of the module are shown on an illustration which all references meeting in the text concern.
- Disconnect draft of a drive of switching from the intermediate lever (97).
- Remove an insulating mat.
- Turn out 4 bolts (40).
- Disconnect electroconducting from sensors switches (S16/10 and S16/10s2) and the electromagnetic activator of blocking of switchings of R/rouble.
- Remove the selector module, check a condition of its sealing laying (39), - in case of need make replacement.
- Installation is made upside-down, - track correctness of installation of sealing laying (39).
- In summary make cleaning of memory of the module of onboard self-diagnostics (see. Head of System of electric equipment of the engine).
|
|
Release models from 01.09.99
Details of installation of the electronic selector module on models of release of c 01.09.99 (c function of consecutive switching of ranges of movement)
|
|
- On release models the electronic selector module with function of consecutive switching of ranges of movement (from 01.09.99 is established see. Head Governing bodies and receptions of safe operation). Details of installation of the module are shown on an illustration which all references meeting in the text concern.
- Disconnect draft of a drive of switching of AT from the intermediate lever (3).
- Remove the central console
- Remove an insulating mat.
- Wring out a lock uvula (1b), turn the socket (1с) on 90 ° in the direction specified by an arrow and, having pulled, disconnect a cable of blocking of EIS (1) from the selector module (N15/5)
- Turn out 3 bolts (2).
- Disunite the contact socket of electroconducting (5).
- Remove the selector module (N15/5), check a condition of its sealing laying (4), - in case of need make replacement.
- Installation is made upside-down, - track correctness of installation of sealing laying. At connection of a cable of blocking of EIS (1) track, that the switch of ignition was in situation "0". Make sure of serviceability of functioning of a blokirator, - a conclusion of the lever of the selector from the situation "R", it should be resolved only at the squeezed-out pedal of a foot brake and in the position "2" of the lock of ignition, key extraction from the lock should be possible only in the position "R" of the lever of the selector.
- In summary make cleaning of memory of the module of onboard self-diagnostics (see. Head of System of electric equipment of the engine).
|
|
|
|