Mercedes M-Class W163

since 1997 of release

Repair and car operation


Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
- Автоматичеcкая transmission
   Search of malfunctions - the general information
   The general principles of functioning of system the transmission, operating signals
   Adjustment of a drive of switching of AT
   Removal and installation of the electrohydraulic control unit by switchings
   Removal and AT installation with the hydrotransformer
   Removal and installation of the selector module
   Removal and installation of a cable of blocking of the electronic switch of ignition (EIS)
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Adjustment of a drive of switching of AT

Design of a drive of switching of AT

33 — the Executive lever
63 — Draught of switching
97 — the Intermediate lever

98 — a draft Head
99 — the Bolt
107 — the Basis of selector assembly


 PERFORMANCE ORDER

  1. The design of a drive of switching of AT is shown on an illustration which all references meeting in the text concern.
  2. Tire out the car on the lift, lift and level strictly horizontally.
  3. Transfer the executive lever (33) to situation "D" and ask the assistant to hold him in this situation during the whole time of performance of procedure.
  4. Connect a head of draft (98) to the intermediate lever (97) and fix it clamps.
  5. Fill draft (63) in a head, connect it to the lever (33) and fix clamps.
  6. Having pressed a head (98), tighten a bolt (99), - track, that draft (63) and a head (98) were not turned, and the lever (33) remained all the time in situation "D".
  7. Check serviceability of functioning of a drive.