Mercedes M-Class W163

since 1997 of release

Repair and car operation


Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ the Power supply system and production of the fulfilled gases
- Systems of electric equipment of the engine
   + ignition and engine management Systems
   - System of preheat of the diesel engine
      Check of candles of an incandescence
      Removal and installation of candles of an incandescence
      Removal and installation of the sensor of temperature of cooling liquid (ECT)
   + Diagnostics of systems of electronic control and diagnostic equipment
   + charge and start Systems
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Removal and installation of the sensor of temperature of cooling liquid (ECT)

Details of installation of the ECT sensor on diesel models


 PERFORMANCE ORDER

  1. Details of installation of the ECT sensor are shown on an illustration which all references meeting in the text concern.
  2. Disconnect a negative wire from the battery.
  3. Remove panels of furnish of the power unit.
  4. Remove the air distributor (see. Head of the Power supply system and production of the fulfilled gases).
  5. Merge cooling liquid from a radiator (see. Head of the Power supply system and production of the fulfilled gases).
  6. Disunite the contact socket of electroconducting (1), release a clamp (2) and remove the ECT sensor (B11/4).
  7. Installation is made upside-down.
  8. In summary fill system of cooling and check its components on existence of signs of development of leaks.