Mercedes M-Class W163

since 1997 of release

Repair and car operation


Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ the Power supply system and production of the fulfilled gases
- Systems of electric equipment of the engine
   + ignition and engine management Systems
   - System of preheat of the diesel engine
      Check of candles of an incandescence
      Removal and installation of candles of an incandescence
      Removal and installation of the sensor of temperature of cooling liquid (ECT)
   + Diagnostics of systems of electronic control and diagnostic equipment
   + charge and start Systems
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Removal and installation of candles of an incandescence

Details of installation of candles of an incandescence of the diesel engine


 PERFORMANCE ORDER

  1. Details of installation of candles of an incandescence are shown on an illustration which all references meeting in the text concern.
  2. Start the engine and warm up it to normal working temperature (about 80°С).

The reversing of candles should be made only after complete warming up of a head of cylinders!

  1. Muffle the engine.
  2. Disconnect from the fuel distributive highway going to TNVD returnable топливопровод.
  3. Disconnect electroconducting (3) (see. The section Check of candles of an incandescence) and by means of the special adaptation (HAZET 4760-1) turn out candles (R9).
  4. Installation is made upside-down, - do not forget to clean previously candle niches a special perlonovy brush in diameter of 10 or 6 mm.
  5. In summary start the engine and check a power supply system on existence of signs of development of leaks.