Mercedes M-Class W163

since 1997 of release

Repair and car operation



Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
+ Transmission line
+ Brake and auxiliary systems
- Suspension bracket and steering
   + Forward suspension bracket
   + Back suspension bracket
   + Steering
   - Suspension bracket geometry
      Check of geometrical parameters of the unit of bridges
      Check and adjustment of height of road gleams
      Corners of installation of wheels of the car - the general information
      Check and adjustment of disorder and выбега
      Check and convergence adjustment
      Check of size of a divergence of forward wheels in turn
+ Body
+ Onboard electric equipment
здесь



Check and adjustment of disorder and выбега

Forward wheels

The corresponding illustrative material is presented on illustrations.

Check and adjustment of disorder of forward wheels

ST + — Positive disorder

ST - — Negative disorder

Check and adjustment выбега forward wheels

NL — Vybeg

Check

 PERFORMANCE ORDER

  1. Make necessary preliminary checks (see. The section Corners of installation of wheels of the car - the general information).
  2. Check correctness of adjustment of road gleams of axes (see. The section Check and adjustment of height of road gleams), in case of need make the corresponding adjustments.
  3. Make measurement of corners of disorder and выбега.

Выбег it is measured at the wheels which have been turned out at an angle 20 °. Compare results of measurement to requirements of Specifications, in case of need make the corresponding adjustments.

Adjustment

 PERFORMANCE ORDER

  1. Adjustment of disorder of forward wheels is made by means of boltovy connections of fastening of back corners of the top cross-section levers to lateral beams of a frame.
  2. Boltovye connections of fastening of forward corners of the top levers to a frame allow to carry out adjustment выбега.
  3. In summary make also adjustment of convergence of wheels (see. Section Check and convergence adjustment).

Back wheels

The corresponding illustrative material is presented on сопр. illustrations which all references meeting in the text concern.

Check and adjustment of disorder of back wheels

+ST — Positive disorder

- ST — Negative disorder

Check and adjustment выбега back wheels

NL — Vybeg

Check and adjustment выбега back wheels

91 — the Top longitudinal extension

91c — the Fixing plate

Check

 PERFORMANCE ORDER

  1. Make necessary preliminary checks (see. The section Corners of installation of wheels of the car - the general information).
  2. Check correctness of adjustment of road gleams of axes (see. The section Check and adjustment of height of road gleams), in case of need make the corresponding adjustments.
  3. Make measurement of corners of disorder and выбега.

Выбег it is measured by means of an electronic inclinometer. Compare results of measurement to requirements of Specifications, in case of need make the corresponding adjustments (see below).

Adjustment

 PERFORMANCE ORDER

  1. Adjustment of disorder of forward wheels is made by means of boltovy connections of fastening of forward corners of the top cross-section levers to lateral beams of a frame.

On the models equipped with xenon headlights it is necessary to disconnect a fixing plate (91с) from a frame and to take aside together with the sensor of level of landing.

  1. Boltovye connections of fastening of back corners of the top levers to a frame allow to carry out adjustment выбега wheels.
  2. In summary make also convergence adjustment (see. Section Check and convergence adjustment).