Repair and service Mercedes Benz M - the Class W163 - Systems of additional safety (SRS)//since 1997 of release / mehanicm.ru

Mercedes M-Class W163

since 1997 of release

Repair and car operation



Mercedes W163
+ Mercedes-Benz Cars of a class M (W163)
+ Governing bodies and receptions of safe operation
+ Current leaving and service
+ Engine
+ Systems of cooling, heating and air conditioner
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Avtomaticheckaya transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   General information and precautionary measures
   Search of causes of failures of electric equipment
   Safety locks - the general information
   Chain breakers - the general information
   The relay - the general information and check of serviceability of functioning
   Digital tire of data of CAN
   + Assembly blocks, elements of control systems
   + Dashboard, switches, traveling computer
   + Driving electromotors
   + Alarm and lighting devices, sensors of a rain and temperature of external air
   - Systems of additional safety (SRS)
      Removal and installation of modules of face-to-face safety cushions
      Removal and installation of modules of lateral safety cushions
   + Audiosystem
   + Schemes of electric connections



Systems of additional safety (SRS)

Removal and installation of modules of face-to-face safety cushions

Driver's safety cushion

Details of installation of the module of a driver's face-to-face safety cushion on release models till 31.08.01

Details of installation of the module of a driver's face-to-face safety cushion on release models from 01.09.01


 PERFORMANCE ORDER

  1. Details of installation of the module of a driver's face-to-face safety cushion are shown on illustrations which all references meeting in the text concern.
  2. Disconnect a negative wire from the battery.
  3. Turn out fixing screws (2).
  4. Separate the module of a safety cushion (1) from a steering wheel.
  5. On release models from 01.09.01 release clamps (3) on contact sockets of electroconducting (4 and 5).
  6. Disunite the contact socket (ы) electroconductings (4/4 and 5) a gas generator fuse.
  7. Finally remove the module of a safety cushion (1).

The module subject to utilization should be discharged previously in the conditions of a car-care center workshop!

  1. Installation is made upside-down, - track reliability of a zashchelkivaniye of a latch (ok) the contact socket (ов).
  2. Having finished installation, make sure of serviceability of operation of the returnable mechanism of the combined podrulevy switch, in summary make SRS diagnostics with use of the special equipment (address for the help to specialists of car-care center).

Passenger safety cushion

Details of installation of the module of a passenger face-to-face safety cushion on release models till 31.08.01

Details of installation of the module of a passenger face-to-face safety cushion on release models till 31.08.01


 PERFORMANCE ORDER

  1. Details of installation of the module of a passenger face-to-face safety cushion are shown on illustrations which all references meeting in the text concern.
  2. Disconnect a negative wire from the battery.
  3. Remove the dashboard (1) (see. Head Body).
  4. On release models from 01.09.01 release clamps (3) on contact sockets of electroconducting (4 and 5).
  5. Disunite the contact socket (ы) electroconductings (4/4 and 5) a gas generator fuse.
  6. Release самоконтрящиеся nuts (2) and remove the module of a passenger face-to-face safety cushion.

The module subject to utilization should be discharged previously in the conditions of a car-care center workshop!

  1. Installation is made upside-down, - track reliability of a zashchelkivaniye of a latch (ok) the contact socket (ов).
  2. In summary make SRS diagnostics with use of the special equipment (address for the help to specialists of car-care center).